Advertisement
Available languages
Available languages
About the temperaturecontrols,
gecom
Not aft features are on all models. Your controls will look like one of the following:
LCDmodels
NOTE: Therefrigerator i s shipped withprotective film covering thetemperature controls, f f thisfilm wasnot
removed duringinstallation, remove it now,
Thetemperature controls arepresetin thefactoryat37_F (3°¢)for the
refrigerator compartment and0_ (-18°C) f orthefreezer compartment
Allow24hoursforthetemperature t o stabilize tothepreset
recommended s ettings,
Refrigerator temperatures c anbeadjusted between 34°F and44°F
(I°C to 7°C), andthefreezer temperatures c anbe adjusted between
-6°F and+6°F(-21°C to -14°C).
Tochange the Refrigerator temperature:
LCD Models:
Access By: Horn e > RefiJgerator
Activate
By: Using tile arrows to select tile desired
temperature.
_4_u must press ENTERto set the new
temperature.
Tochange the Freezer temperature:
Access By: Home > Freezer
Activate By: Using tile arrows to select tile desired
temperature.
You must press ENTER to set the new
teml)erature.
Once
the desired
temperature
has been
set, the display will
return
to the NOMEscreen
and show the set temperatures
tmderneath
the actual
temperature
display for several
seconds.
Several a(!iusnnents
may be required.
Each time
you a(!iust the controls,
allow 24 ho/u_ fin" the refligerator
to reach tile temperature
you have set.
Non-LCD Models:
To change the temperature,
press and release the WARMER
or COLDERpad. The SETlight will come on and the display
will show tile set teml)erature.
To change
tile temperature,
tap either
tile WARMER or COLDERpad until tile desired
temperature
is displayed.
Once the desired
temperature
has been
set, the
temperature
display will return
to tile actual refiigerator
and fl'eezer
temperatures
after 5 seconds.
Several
ac!justnlents
may be required.
Each time you a(!just tile
controls,
allow 24 houi_ tor tile reliigerator
to reach tile
temperature
you have set.
Thetemperature controls can display both the SKl'temperature as weft
as the actual temperature in the refrigerator and freezer Theactual
temperature may vary slightly from the SETtemperature based on
usage and operating environment
Turningthe cooling system off."
LCDmodels:Turningthe coolingsystem OFFstops coolingin both the
freezer andrefrigerator compartments,but doesnot shut off electrical
power to the refrigerator
Non-LCDmodels:Setlng either or both controls to OFFstops coolingin
both the freezer and refrigerator compartments,but doesnot shut off
electrical power to the refrigerator
LCD Models:
Access By: Home
> Options
> lnfimnation
and Settings >
Cooling
System Ott
To ttlrn tile cooling
s}:steln back on, press tile to/ich screen
and press the ON button.
Activate By: Pressing
ENTER.
Non-LCD Models:
%q) tile WARMER pad fin" either
tile refl_gerator
or tile
fl'eezer tmtil the display shows OFF. To turn the unit hack on,
press tile COLDERpad fin" either
tile refl_igerator
or fl'eeze_:
The SETlight
will ilhmfinate
on the side you selected.
Then
press tile COLDERpad again
(on tile side 'where tile SET
light is ilhmfinated)
and it will go to the preset
points
of O°F
(-18°C)
for the ti'eezer and 37°F (3°C) fin" the retiigerator.
When
tile unit is turned
back on, it will take up to 24 ho/u_
to stabilize.
Performance Air Flow System
Tile Perfommnce
M>How
System is designed
to maximize
temperature
control
in tile reli_igerator
and ti'eezer
compartments.
This unique
spedal
feature
consists
_ff tile
Mr Tower along the back wall of the refligerator
and the
Mr Ttmnel
on tile bottom
portion
of tile fl'eezer
rear wall.
Placing food in fl'ont of tile lou\'e_s
on these components
will not alti_ct perfinmance.
Mthough
tile Mr Tower and
the Air Tunnel
can be removed,
doing so will attect
temperature
i)e_ommnce.
(F)n" remo\_fl
instructions,
on-line,
24 horus a da> contact
us at ge.com
or call
800.GE.CM),ES.
In Canada,
contact
us at geappliances.<_
or call 1.800.361.3400.)
Advertisement
