GE JKP20 Owner's Manual page 17

ge.com
The oven door must be closed and all controls must be set correctly for the cycle to work properly.
HOUR MIN
HOUR MIN
START
How to Delay the Start of Cleaning
[] Presstl_e SELF CLEAN STD/LOWpad
once toI" a 4-hotli" (lean [iil/e oi"
twice fi)r a 3-horn clean time.
A 3-horn selt_clean time is
i'ecoilli/l ended fi)r rise when
cleaning small, contained spills. A
seltklean time of 4 horns or longer
is recommended t0r a dirtier o',en.
[21 lfa time other than 4 hom_ or
3 l/ores is needed, rise tile
HOUR
and MIN + or- pads and enter
tile desired clean time.
_m can change the clean time to any
tlIlle" between .3
hotli_
and 5
hotli_,
del_ending, on how dirt))our oxen is.
[]
Press tile
DELAYSTART
pad.
[] Using the HOUR and MIN + or -
pads, enter the time of day }ou want
the clean cycle to start.
Tile door locks automatically: Tile display
will show tile start time. It will not be
possible to open tile oven door/mfil
the temperature drops below the lock
temperature and tile
LOCKED
light
goes off.
X,_]/en tile LOCKED light goes off, you will
be able to open tile doo_;
NOTE: Onmodelswith touchpadcontro/s for
bothovens, y oucanseta delaydean in both
ovens at thesamet/_ne. T hesecond ovenset wi//
automatically delaythestartof c/eanlbg until the
endof thefkst oven's dean cycle.
To recaflthestarttimeof thesecond ovenset,
presstheDEL4YSTART pad on thecontrols for
the second oven.
[] Press tile
STARTpad.
After a Clean Cycle
You may notice some white ash in tile
oven. Wipe it 1117 w ith a damp cloth after
tile
oven cools,
If whitespotsremain, r emove themwith a
soap-filled scouring padandrinsethoroughly w ith
a wnegarand watermlxture.
These deposits are usually a salt
residue that cmmot be removed
by
tile clean cycle.
If the oven is not clean after one clean
wcle, repeat the cycle.
!i_:Y(m cannot set tile o_en fi)r cooking
tmfil tile oxen is cool enou_*h for tile
door to unlock.
iJi::If tile shelves become hard to
slide, xdpe tile shelf sui)ports with
cooking oil.
17