GE JKP20 Owner's Manual page 22

Beforeyoucall forservice...
Troubleshooting -tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Possible Causes What To Do
Control signals after
You forgot to enter a * Press tile
BAKE
pad and desired temperatm'e or tile
enteringcookingtime
bake temperature or SELF CLEAN STD/LOW pad mad desired clean time.
or delay start
clea_fing time.
Food does not bake
Oven controls improperly set.
* See the
Using the oven
section.
orroastproperly
Shelf position is incorrect * See the
Using the oven
section.
or the shelf is not level.
Incorrect cookware or
* See the
Using the
oven section.
cookware of hnproper
size being used.
Oven thermostat
* See the Adjust the oven thermostat--Do it yourself!
needs adj ustlnent, sectiou.
Fooddoes not Oven controls improperly set. * Make sure you press the BROIL
HI/LO
pad.
broilproperly
Improper shelf • See the Broiling Guide.
position being used.
Food being cooked * Llse the broiling pan and grid that came with your oven.
ha a hot pan. Make sure it is cool.
Cookware not suited * Llse the broiling pan and grid that came with your oven.
for broiling.
Alumhmm foil used on the * See the
Using the oven
section.
the broiling pan mad grid has
not been fitted properly mad
slit as recommended.
ha some areas the power * Preheat the broil element fi)r 10 minutes.
(voltage) may be low.
• Broil for the longest period of time recommended in
the Broiling Guido.
Clock and timer A fuse ha your home • Replace the fl/se or reset the ci_vuit breaker:
do not work
may be blown or the
circuit breaker tripped.
Oven controls hnproperly set. • See the
Using the clock, timer and control lockout
se('tiou.
Oven light does Light bulb is loose or defective. • Tighteu or replace the lmlb.
not work
Pad operating light is broken. • Call for service.
22