Auto Zoom - Canon MF7280 - ImageCLASS B/W Laser Copying Manual

NOTE
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
3
Press
Copying starts.
NOTE
• To return the copy ratio to 100%, press [Direct].
• To cancel all settings and return the machine to the Standard mode, press
(Reset).

Auto Zoom

You can set the machine to automatically select the appropriate copy ratio based on
the size of the original and the selected copy paper. The same copy ratio is used for
the horizontal (X) and vertical (Y) axes. The available copy ratios are from 50% to
200%.
IMPORTANT
• You cannot use the Auto setting on the Copy Ratio screen with the Automatic Paper
Selection mode.
•
You cannot copy highly transparent originals, such as transparencies, using the Auto
setting on the Copy Ratio screen. Use the Preset Zoom or Zoom by Percentage mode
instead.
•
To use the Auto setting on the Copy Ratio screen, your originals must conform to one of
the standard paper sizes:
- 11" x 17", LGL, LTR, LTRR, STMT or STMTR (You can only place an STMTR original
on the platen glass.)
(Start).
Changing the Copy (Zoom) Ratio
2
2-23