Canon MF7280 - ImageCLASS B/W Laser Copying Manual page 111

3
5
3-22
Frame Erase
NOTE
• To enter values in millimeters, press [mm].
•
When entering the value in millimeters, you can also use
and (Clear) to clear your entry.
• You can change the value by pressing [-] or [+], even if you have entered the value
using - (numeric keys).
• If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
• The default setting is '3/4" (18 mm)'. The maximum binding erase width that you
can set is '13/16" (20 mm)'.
Press (Start).
Copying starts.
NOTE
To cancel this setting, press [Special Features] ➞ [Frame Erase] ➞ [Cancel].
•
• To cancel all settings and return the machine to the Standard mode, press
(Reset).
- (numeric keys),