4
2
5
Plug and Play Installation (Windows 98)
1
2
3
2-22
Installing the Software
When the message box below appears after the files are
copied, connect the USB cable, and then turn the printer ON.
NOTE
If you are using Windows XP, select [Install Software Automatically
(Recommended)] in the dialog box displayed next ➞ click [Next].
Click [Exit] to finish the installation.
The printer icon is displayed in the [Printers] folder. The driver is now installed.
Connect the cable from the printer's USB port to the PC's USB
port, and then turn the printer ON.
Start Windows, and then insert the Printer Driver Software
CD-ROM into the CD-ROM drive.
The Add New Hardware Wizard starts.
In the first dialog box of the Add New Hardware Wizard, click
[Next].