Specifying The Finishing Options; Selecting A Finishing Option; Selecting The Output Option - Canon MF7280 - ImageCLASS B/W Laser Driver Manual

Specifying the Finishing Options

This section describes how to select a finishing option and how to use Booklet
Printing.

Selecting a Finishing Option

The various options in the [Finishing] sheet enable you to select the most
appropriate tray or bin output method for each document.

Selecting the Output Option

The available output options are:
Off
Collate
Group
Staple & Collate Outputs sorted and stapled copies of the document into the
Staple & Group Outputs document pages in stapled batches into the output tray.
NOTE
•
The available finishing options vary, depending on the printer model you use or output
options attached to the printer.
•
When a collate option is available in the [Print] dialog box of the application software, the
Collate option setting of the printer driver has priority, regardless of the same setting in
the application software. However, in some application software, output is collated when
the collate option is selected in the application software even if the Collate option is not
selected in the printer driver.
•
To output document pages using the Group option, you must select [Group] in the printer
driver, regardless of a group option setting in the [Print] dialog box of the application
software.
Outputs the printed document without any finishing.
Outputs sorted copies of the document in correct binding order
into the output tray.
Outputs document pages in groups into the output tray.
output tray.

Specifying the Finishing Options

3
3-19