Updating The Alternate Printer Driver (Windows 2000/Xp/Server 2003) - Canon MF7280 - ImageCLASS B/W Laser Driver Manual

8
Restart the computer.
9
Check the printer configuration settings in the [Configuration]
sheet (Windows 98/Me) or [Device Settings] sheet (Windows
2000/XP/Server 2003), and then reconfigure them if they have
been changed.
NOTE
If you are using a shared printer in the Print Server (Point and Print) environment, it
is necessary to install the Canon Driver Information Assist Service in the server PC
in order to set up the printer configuration automatically or to use the Job
Accounting feature (see "Installing the Canon Driver Information Assist Service,"
on p. 2-29).
Updating the Alternate Printer Driver (Windows 2000/XP/
Server 2003)
If you use a shared printer on a network, and an alternate printer driver is installed
on the server, the alternate printer driver is updated simultaneously when you
install a new driver with the Installer. To update the alternate printer driver manually
without using the Installer, follow the procedure below.
1
On the [Start] menu, point to [Settings] ➞ click [Printers].
NOTE
•
If you are using Windows XP Professional/Server 2003, on the [Start] menu, click
[Printers and Faxes].
•
If you are using Windows XP Home Edition, on the [Start] menu, click [Control
Panel] ➞ [Printers and Other Hardware] ➞ [Printers and Faxes].
2
Click [Server Properties] on the [File] menu to open the [Print
Server Properties] dialog box ➞ click the [Drivers] tab.
Installing the Software
2
2-35