Exit Menu - Asus P7H55 User Manual

[No]
The first time wizard will run again when you enter the Express Gate environment after
clearing its settings.
2.9

Exit menu

The Exit menu items allow you to load the optimal or failsafe default values for the BIOS
items, and save or discard your changes to the BIOS items.
Exit Options
Exit & Save Changes
Exit & Discard Changes
Discard Changes
Load Setup Defaults
Pressing <Esc> does not immediately exit this menu. Select one of the options from this
menu or <F10> from the legend bar to exit.
Exit & Save Changes
Once you are finished making your selections, choose this option from the Exit menu to
ensure the values you selected are saved to the CMOS RAM. An onboard backup battery
sustains the CMOS RAM so it stays on even when the PC is turned off. When you select this
option, a confirmation window appears. Select Ok to save changes and exit.
Exit & Discard Changes
Select this option only if you do not want to save the changes that you made to the
Setup program. If you made changes to fields other than System Date, System Time, and
Password, the BIOS asks for a confirmation before exiting.
Discard Changes
This option allows you to discard the selections you made and restore the previously saved
values. After selecting this option, a confirmation appears. Select Ok to discard any changes
and load the previously saved values.
Load Setup Defaults
This option allows you to load the default values for each of the parameters on the Setup
menus. When you select this option or if you press <F5>, a confirmation window appears.
Select Ok to load default values. Select Exit & Save Changes or make other changes before
saving the values to the non-volatile RAM.
Chapter 2: BIOS information
enter the Express Gate. User data includes the Express Gate's
settings as well as any personal information stored by the web
browser such as bookmarks, cookies, browsing history. This is
useful in the rare case where corrupt settings prevent the Express
Gate environment from launching properly.
Set to [No] to disable the Reset User Data function when entering
the Express Gate.
Exit system setup
after saving the
changes.
F10 key can be
used for this
operation.
2-27