Table of Contents
Advertisement
8.
Serial ATA connectors (7-pin SATA1-6)
These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s hard disk
and optical disk drives. The Serial ATA 3Gb/s is backward compatible with Serial ATA
1.5Gb/s specification. The data transfer rate of the Serial ATA 3Gb/s is faster than the
standard parallel ATA with 133 MB/s (Ultra DMA133).
P7H55
P7H55 SATA connectors (ICH10R
Install the Windows
9.
Serial port connector (10-1 pin COM1)
This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
P7H55
P7H55 Serial port (COM1) connector
The COM module is purchased separately.
1-25
SATA4
SATA1
)
®
XP Service Pack 2 or later version before using Serial ATA.
®
SATA5
SATA6
SATA2
SATA3
COM1
PIN 1
Chapter 1: Product introduction
Hide quick links:
Advertisement
Table of Contents
