Chipset - Asus P5MT-C User Manual

CPU Internal Thermal Control [Auto]
Disables or sets the CPU internal thermal control.
Configuration options: [Auto] [Disabled]
The following item appears only when you installed an Intel
processor that supports Hyper Threading Technology.
Hyper Threading Technology [Enabled]
Allows you to enable or disable the processor Hyper Threading Technology.
Configuration options: [Disabled] [Enabled]
The following item appears only when you installed an Intel
processor that supports Intel
Intel(R) SpeedStep Technology [Automatic]
Allows you to use the Enhanced Intel SpeedStep
to [Automatic], you can adjust the system power settings in the operating
system to use the EIST feature.
Set this item to [Disabled] if you do not want to use the EIST.
Configuration options: [Automatic] [Disabled]
•
•
4.4.5

Chipset

The Chipset menu allows you to change the advanced chipset settings.
Select an item then press <Enter> to display the sub-menu.
Advanced Chipset Settings
DRAM Frequency
Configure DRAM Timing by SPD
Onboard LAN Boot ROM
PEG Port Configuration
PEG Port
PEG Port VC1 Map
PEG Force x1
Memory Remap Feature
DRAM Frequency [Auto]
Allows you to manually set the DRAM frequency. Setting to [Auto] allows
the BIOS to automatically set the DRAM frequency by Serial Presence
Detect (SPD). Configuration options: [Auto] [533 MHz] [667 MHz]
4-22
Refer to the Appendix for details on how to use the EIST feature.
The motherboard comes with a BIOS file that supports EIST.
Speedstep technology.
®
Technology. When set
®
[Auto]
[Enabled]
[Enabled]
[Enabled]
[TC7]
[Disabled]
[Enabled]
Chapter 4: BIOS setup
Pentium
®
Pentium
®
Manual DRAM Frequency
Setting or Auto by SPD.
4
®
4
®