Asus P5MT-C User Manual page 41

6. Gigabit LAN controller setting (3-pin LAN_EN1, LAN_EN2)
These jumpers allow you to enable or disable the onboard Broadcom
BCM5753 Gigabit LAN1 or LAN2 controller. Set to pins 1-2 to activate
the Gigabit LAN controller.
2
P5MT-C LAN_EN1 Setting
2
P5MT-C LAN_EN2 Setting
7. RAID controller selection (3-pin RAID_SEL1)
This jumper allows you to select the RAID configuration utility to use when
you create disk arrays. Place the jumper caps over pins 1-2 if you want
to use the LSI Logic Embedded SATA RAID Setup Utility (default);
otherwise, place the jumper caps to pins 2-3 to use the Intel
Storage Manager.
2
P5MT-C RAID_SEL1 Setting
ASUS P5MT-C
LAN_EN1
3
2 2
1
Enable Disable
(Default)
LAN_EN2
2 3
1 2
Enable Disable
(Default)
RAID_SEL1
1
2 2
3
LSI RAID ROM INTEL RAID ROM
(Default)
®
Matrix
®
2-21