Asus P5MT-C User Manual page 39

2. CPU fan pin selection (3-pin FM_CPU1, FM_CPU2)
These jumpers allow you to connect either a 3-pin or a 4-pin fan cable
plug to the CPU fan connectors (CPU_FAN1, CPU_FAN2). Set these
jumpers to pins 1-2 if you are using a 3-pin fan cable plug, or to pins
2-3 if you are using a 4-pin plug.
2
P5MT-C FM CPU Setting
3. USB device wake-up (3-pin USBPW12, USBPW34, USBPW56,
USBPW78)
Set these jumpers to +5V to wake up the computer from S1 sleep
mode (CPU stopped, DRAM refreshed, system running in low power
mode) using the connected USB devices. Set to +5VSB to wake up
from S4 sleep mode (no power to CPU, DRAM in slow refresh, power
supply in reduced power mode).
2
P5MT-C USB Device Wake-Up
• The USB device wake-up feature requires a power supply that can
provide 500mA on the +5VSB lead for each USB port; otherwise, the
system would not power up.
• If you are using Windows 2000, you need to install Service Pack 4 to
wake up the system from S4 sleep mode.
• The total current consumed must NOT exceed the power supply
capability (+5VSB) whether under normal condition or in sleep mode.
ASUS P5MT-C
FM_CPU1
1 2
3-pin fan
FM_CPU2
1
2
3-pin fan
USBPW12
1 2
USBPW12
+5V
(Default)
USBPW56
USBPW78
2 1
+5V
USBPW56
USBPW78 (Default)
USBPW34
USBPW34
2 1
+5V
(Default)
2 3
4-pin fan
(Default)
2
3
4-pin fan
(Default)
2 3
+5VSB
3 2
+5VSB
3 2
+5VSB
2-19