Wep Key Settings; 802.1X Security Settings; Wpa Security Settings; Wireless Lan Plugins - Nokia E66 User Manual

In an ad-hoc network, all devices must use the same
WEP key.
Select WLAN security settings
WEP key in use
•
Authentication type
•

WEP key settings

•
key.
WEP key settings
In an ad-hoc network, all devices must use the same
WEP key.
Select WLAN security settings
and from the following:
WEP encryption
•
encryption key length.
WEP key format
•
enter the WEP key data in
format.
WEP key — Enter the WEP key data.
•

802.1x security settings

Select 802.1x as the WLAN security mode.
802.1x authenticates and authorises devices to access
a wireless network, and prevents access if the
authorisation process fails.
Select WLAN security settings
WPA/WPA2 — Select
•
Authentication Protocol) or
132
secret key used for device identification).
and from the following:
— Select the desired WEP key.
— Select Open or Shared.
— Edit the settings for the WEP
WEP key settings
>
— Select the desired WEP
— Select whether you want to
ASCII or Hexadecimal
and from the following:
EAP (Extensible
Pre-shared key
EAP plug-in settings
•
WPA2 > EAP, select which EAP plug-ins defined in
your device to use with the access point.
Pre-shared key
•
Pre-shared
identifies your device to the WLAN to which you
connect.

WPA security settings

Select WPA/WPA2
Select WLAN security settings
WPA/WPA2
•
Authentication Protocol) or
secret key used for device identification).
EAP plug-in settings
•
EAP, select which EAP plug-ins defined in your
device to use with the access point.
Pre-shared key
•
shared key, enter the shared private key that
identifies your device to the WLAN to which you
connect.
WPA2 only mode
•
(Advanced Encryption Standard) encryption, select
Off. To allow AES only, select

Wireless LAN plugins

Select Menu
>
Access points.
The EAP (extensible authentication protocol) plug-ins
(a
are used in wireless networks to authenticate wireless
devices and authentication servers, and the different
— If you selected
— If you selected WPA/WPA2
key, enter the shared private key that
as the WLAN security mode.
and from the following:
— Select EAP (Extensible
Pre-shared key
— If you select WPA/WPA2
— If you select WPA/WPA2
— To allow both TKIP and AES
On
Tools Settings Connection
> >
WPA/
>
(a
>
Pre-
>
>