Colors Vary Between Computers; Colors Do Not Match - Xerox 7760DN - Phaser Color Laser Printer User Manual

Colors Vary Between Computers

Problem
The colors printed from one computer do not match the colors printed from a different
computer.
Solution
To prevent color differences in print jobs:
1.
Confirm that the driver settings for Print Quality and Color Correction are identical on
both computers.
2.
Adjust the settings as needed.
Note: Driver settings override the settings selected on the control panel.
See also:
Adjusting Color on page 4-3

Colors Do Not Match

Problem
The color produced by the printer is different from the color that it must match.
Solution
For help with color matching problems, go to www.xerox.com/office/7760support.
If the problem continues, follow these steps to ensure that the colors produced by the printer
are accurate:
1.
Confirm that the settings for Print Quality and Color Correction are identical in the
printer driver and on the control panel.
2. Print the RGB Sampler pages or CMYK Sampler pages.
a. On the control panel, highlight
b.
Select
Sample Pages
c. Select
RGB Sampler Pages
button.
3. Use the values on the color sampler to set the colors in your document.
See also:
Advanced Features Guide at
, and then press the OK button.
Information
, and then press the OK button.
or
CMYK Sampler Pages
www.xerox.com/office/7760support
Phaser® 7760 Color Laser Printer
4-15
Solving Print-Quality Problems
, and then press the OK