Xerox 7760DN - Phaser Color Laser Printer User Manual page 91

TekColor Correction
None
Black and White
Use Printer Control
Panel Setting
To select the color correction in a supported driver:
Operating System
Windows 98 SE,
Windows 2000,
Windows XP, or
Windows Server 2003
Mac OS 9.x
Mac OS X, version
10.2 and higher
See also:
Knowledge Base at www.xerox.com/office/7760support
Description
Applies no color correction. Use with other color
management tools, such as ICC (International Color
Consortium) profiles, ColorSync, or the PANTONE
Color Chart for your printer.
Converts all colors to shades of gray.
Uses the color correction set in the printer. The color
correction can be set in the printer using either the
control panel or the CentreWare software (if available).
Steps
1. Select the TekColor tab.
2. Select the desired color correction. Some of the color corrections are
grouped under Office Color or Press Match.
1. In the Print dialog box, select General.
2. Select TekColor from the drop-down list.
3. Select the desired color correction for Color.
1. In the Print dialog box, select Image Quality from the drop-down list.
2. Select the desired color correction from the Color Correction drop-
down list.
Phaser® 7760 Color Laser Printer
4-4
Controlling the Quality of Your Prints
®