Xerox 7760DN - Phaser Color Laser Printer User Manual page 82

Turning Off Custom Size Printing for Tray 2
Note: When you have finished using custom paper in Tray 2, select
paper size when you load the standard-size paper. The tray guides are then used by the printer
to determine the paper size in the tray.
On the control panel:
1. Select
Printer Setup
2. Select
Paper Handling Setup
3.
Select , and then press the OK button.
Tray 2 Setup
4. Select , and then press the OK button.
Change
5.
Select
Auto-Sensed
tray's paper guides.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button. The paper size is set to match the
Phaser® 7760 Color Laser Printer
3-47
Printing on Specialty Media
as the
Auto-Sensed