Table of Contents
Advertisement
64
What to do if ...
What to do if ...
The oven does not heat
up
The oven lighting is not
operating
The oven is not heating
up. Time
F11 appears in the clock
display
An error code not listed
above appears in the time
display
If you are unable to remedy the problem by following the above sugges-
tions, please contact your dealer or the Customer Care Department.
Problem
The oven has not been
switched on
The clock has not been set
The required settings have not
been set
The oven's automatic cut-out
has been triggered.
The house wiring fuse (in the
fuse box) has tripped
The oven light bulb is faulty
Demo mode is on.
is lit.
The meat probe has short
circuited or the plug of the
meat probe is not firmly in po-
sition in the socket
Fault in the electronics
Possible cause
Remedy
Switch the oven on
Set the current time on the
clock
Check the settings
See Automatic cut-out
Check fuse. If the fuses trip
several times, please call a
qualified electrician
Replace oven bulb
Keep Selection
button
pressed for 2 seconds, then
within 2 seconds press and
hold Selection
and
buttons for 2 seconds
Insert the plug of the meat
probe as far as it will go into
the socket on the side wall of
the oven
Switch off the appliance via
the house fuse or the safety
switch in the fuse box and
switch it on again.
If displayed again, please con-
tact the Customer Care De-
partment
Advertisement
Table of Contents
