Table of Contents
Advertisement
How to use the clock functions
• After a clock function has been selected, the corresponding function flashes
for about 5 seconds. During this period, the desired times can be set or modi-
fied using the
• When the desired time has been set, the function continues to flash for
approx. 5 seconds. After that the function is then lit. The set time begins to
run.
• With Countdown the oven must also be switched on in order to set the clock
function.
• By pressing
Checking the time set or remaining
Press the Selection
flashes and the time set or remaining is displayed.
Using residual heat with the Cook time
tions
When the Cook time
switches the heating elements off, when 90% of the time set or calculated has
elapsed. The residual heat present is used to continue the cooking process until
the time set has elapsed (3 to 20 mins.).
or
button.
and
at the same time, the time set can be reset.
button repeatedly, until the appropriate clock function
and End time
Using the Oven
and End time
clock functions are used, the oven
25
clock func-
Advertisement
Table of Contents
