Programme Progress; Interrupting A Programme/Adding Washing; End Of The Wash Cycle/Removing The Washing - Electrolux LAVAMAT 62610 User Information

Programme progress

• The programme progress display shows the programme step that is
currently being carried out.
– (Prewash)
– (Main wash)
–
(Rinse)
–
(Extra Rinse)
–
(Spin)
–
(End)
• The multi-display shows the estimated time remaining (in hours and
minutes) until the end of the programme.
3
The remaining programme time may increase or briefly remain constant
during the wash programme as the programme adjusts to various con-
ditions while washing (e. g. type of washing, amount of washing, rec-
ognising out-of-balance when spinning, special rinse cycle, etc.).

Interrupting a programme/Adding washing

Interrupting a programme
• A washing programme can be interrupted at any time by pressing the
button (START/PAUSE) and then re-started by pressing the
button (START/PAUSE) again.
• To stop the washing machine before the programme has ended, turn
the programme knob to
water in the appliance!
Adding washing
It is possible to add washing, as long as the
1. Press the
2. Close the door and press the
programme will continue.

End of the wash cycle/Removing the washing

When the programme has finished,
gramme progress display. The door can be opened as soon as the
dicator (DOOR) is lit green.
1. Open the door and remove the washing.
2. Turn the programme knob to
3. Close the water tap.
(OFF). Important: Be careful if there is
button (START/PAUSE). The door can be opened.
(OFF).
(DOOR) light is lit green.
button (START/PAUSE) again. The
(END) will illuminate on the pro-
in-
15