Installation - Electrolux EWP 106100 W User Manual

6 electrolux
Spin Speed
1) Connect the water inlet hose to a water tap with a 3/4'' thread.

INSTALLATION

UNPACKING
Warning!
• Read carefully the "Safety informa-
tion" chapter before installing the ap-
pliance.
Warning! Remove and keep all
transit devices so that they can be
refitted if the appliance ever has to be
transported again.
x 3
A B
x 3
C
x 2
1)
Necessary tools
10 mm 30 mm
• Remove the external film. Use a cutter, if
necessary.
• Remove the cardboard top.
• Remove the polystyrene packaging ma-
terials.
• Spread the front piece on the floor be-
hind the appliance and then lay the appli-
ance carefully rear side down on it. Make
1) These tools are not provided with the appliance.
Maximum
x 1
800 rpm (EWP86100W)
1000 rpm (EWP106100W)
1200 rpm (EWP126100W)
sure that no hoses are crushed in the
process.
• Remove the polystyrene base from the
bottom.
• Return appliance to the upright position.
• Open the door and remove the plastic
hose guide, the bag containing the in-
struction booklet and the plastic plug
caps from the drum.
1
2