Lexmark CS410 Technical Reference Manual page 52

Byte Field name
8 Bar/Space Width
Units
9–10 Bar Width #1
11–12 Space Width #1
13–14 Bar Width #2
(Wide)
Type Range
int 0=default
(1/600" units)
1=1/300"
units
2=1/600"
units
3=1/1200"
units
[int int] 12–24 (dec)
00 0C–00 18
(hex)
[int int] 12–24 (dec)
00 0C–00 18
(hex)
[int int] 27–72 (dec)
00 1B–00 48
(hex)
Note: The
range of
values for Bar
Width 2
depends on
the value of
Bar Width 1,
where min =
2.25 x Bar
Width 1, max
= 3 x Bar
Width 1
One-dimensional bar codes
Default value Description
0 or 2 (dec) Optional
00 or 02 (hex) Specifies units for bar and space
widths
12 (dec) Optional
00 0C (hex) Note: Values that go beyond the
defined range are appropriately
clipped and set to the minimum and
maximum values.
The default bar code engine ITF-14
narrow bar width is 0.02 inches. If
byte 5 is default 00 (600 dpi), then
the bar width (narrow) is 00 0C (hex)
or 12 (dec).
12 (dec) Optional
00 0C (hex) Note: Values that go beyond the
defined range are appropriately
clipped and set to the minimum and
maximum values.
The default bar code engine ITF-14
narrow space width is 0.02 inches. If
byte 5 is default 00 (600 dpi), then
the Space Width (Narrow) is 00 0C
(hex) or 12 (dec).
Note: The Optional
default value
Note: Values that go beyond the
for Bar Width
defined range are appropriately
2 depends on
clipped and set to the minimum and
the value of
maximum values.
Bar Width 1,
where default
= 2.50 x Bar
Width 1
52