Lexmark CS410 Technical Reference Manual page 139

Bar code name
USPS tray label Y
10-digit 2 of 5
Zebra Y
1 PDF417 and MaxiCode can be printed using Optra Forms only when the bar code option is also installed in the printer, and when the accompanying bar code dictionaries
have been installed in Optra Forms.
2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in
the printer, and the accompanying bar code dictionaries is installed in Optra Forms.
3 These bar codes are not available in PCL 5 or PostScript.
Y Y Y Y
Y Y Y Y
Sample image
2
Y Y
2
Y Y
Supported bar codes
139
Comments
USPS tray label 10-digit 2 of 5 is a modified
interleaved 2-of-5 code.
The bar code encodes the 5-digit ZIP Code
destination of the tray, the 3-digit content identifier
number (CIN) applicable to the content of the tray,
and the applicable 2-digit USPS processing code.
The Zebra code is used by the USPS on tray labels
to serve as a visual indication that the tray contains
bar-coded automation-rate mail. It is not read by bar
code readers.
The Zebra code consists of a series of diagonal or
vertical marks. The diagonal or vertical marks must
each be from 0.25 to 0.375 inch high, and from
0.125 to 0.25 inch wide, separated by blank spaces
equal in size to the diagonal or vertical marks.