Lexmark CS410 Technical Reference Manual page 41

Bar code descriptor for Japan Post 4-State bar code
Byte Field name
0–1 Symbology ID
2 Bar Code Size
3 Bar Width
4 Space Width
5 Timing Bar Height 1.05a–1.35a
6–7 Long Bar Height
8–15 Reserved
Notes on Japan Post data:
• Data consists of a 7-digit postal code number, followed optionally by any block and house number
information.
• A hyphen may be included between the third and fourth digits of the postal number, and between the
postal number and the block and house number. Each of these hyphens, if included, is ignored.
• Any hyphens included as part of the block and house number information are encoded as data in the
bar code.
• Invalid characters or lengths in the postal code are flagged with an error.
• Invalid characters in the block and house number information are flagged with an error.
Bar code descriptor for Dutch Post 4-State bar code
Byte Field name
0–1 Symbology ID
2 Bar Width
3 Bar Pitch
4 Synchronization Bar
Height
5 Upward, Downward
Bar Height
Default
Range value
— 23 (dec)
00 17(hex)
80–115 (dec) 100 (dec)
50–73 (hex) 64 (hex)
0.5a–0.7a 0.6a
0.45a–0.6a 0.6a
1.2a
3.4a–3.6a 3.6a
— —
Default
Range value
— 24 (dec)
00 18(hex)
38–63 (dec) 50 (dec)
26–3F (hex) 32 (hex)
20–24 (dec) 22 (dec)
14–18 (hex) 16 (hex)
102–152 (dec) 127 (dec)
66–98 (hex) 7F (hex)
160–216 (dec) 188 (dec)
A0–D8 (hex) BC (hex)
One-dimensional bar codes
Description
Selects Japan Post 4-State bar code
symbology
Sets overall bar code size
This value called "a" is a unit-less value
multiplying factor used below in other
parameters.
Set the bar width
(a = bar code size from byte 2)
Sets space width
(a = bar code size from byte 2)
Sets the timing bar height
(a = bar code size from byte 2)
Sets the long bar height
(a = bar code size from byte 2)
—
Description
Selects Dutch Post 4-State symbology
Sets the bar width to 1/100 mm
Sets the number of bars that print per inch
Sets the synchronization bar height to 
1/100 mm
Sets the upward and downward bar height
to 1/100 mm
41