This chapter is divided into sections on the front and rear panel components of the Model FE104
and Model FE108 hubs. Use the key at the bottom of each illustration to identify the associated
component.
Front Panel
The front panel contains the LEDs, RJ-45 100BASE-TX port connectors, and Normal/Uplink push
button. Figure 2-1 shows the front panel of the Model FE104 hub, and Figure 2-2 shows the front
panel of the Model FE108 hub.
1
2
3
1 0 0 B A S E - T X F A S T E T H E R N E T H U B F E 1 0 4
Pwr
Col
1
10
20
Utilization %
Key:
1 = Pwr (power) LED
2 = Col (collision) LED
3 = Utilization % LEDs
4 = RJ-45 ports with Link/Rx and Part (partition) LEDs on each port
5 = Normal/Uplink push button
Figure 2-1.
Front panel of the Model FE104 Fast Ethernet Hub
Physical Description
F AST
1 0 0 M b p s
>30
Physical Description
4
Link/Rx
Part
Normal/Uplink
1
2
3
4
Chapter 2
5
186EA
2-1