Led Display; Figure 2-2. Front Panel Of The Model Fe108 Fast Ethernet Hub - NETGEAR FE104 - Hub Installation Manual

Installation Guide for the Model FE104 and Model FE108 Fast Ethernet Hubs
1
2
3
100BASE-TX FAST ETHERNET HUB FE108
Pwr Col 1 10 20
Utilization %
Key:
1 = Pwr (power) LED
2 = Col (collision) LED
3 = Utilization % LEDs
4 = RJ-45 ports with Link/Rx and Part (partition) LEDs on each port
5 = Normal/Uplink push button
Figure 2-2. Front panel of the Model FE108 Fast Ethernet Hub

LED Display

Three LEDs on the front panel of the hub and two on each port connector allow you to identify the
following information:
• Status of the hub power supply
• Collision occurrence on an Ethernet segment in a standalone hub or a stack of hubs
• Data utilization percentage of the Ethernet segment in a standalone hub or a stack of hubs
• Link and receive activity for all ports in the hub
• Partition status for all ports in the hub
2-2
100 Mbps F AST
>30
1 2
4
3 4 5
5
Link/Rx Part
Normal/Uplink
6 6 8
Physical Description
185EA