What To Do If; Cleaning The Door; Cleaning The Drum; Clean Operating Screen And Housing - Electrolux EDE 77550W User Manual

Cleaning the door

Clean periodically the interior part of the door
to remove any fluff. Accurate cleaning en-
sures correct drying.

Cleaning the drum

Caution! Do not use abrasives or steel
wool to clean the drum.
Lime in the water or cleaning agents may
form a barely visible lining on the inside
of the drum. The degree to which the
laundry has been dried is then no longer
detected reliably. The laundry is damper

What to do if ...

Troubleshooting by yourself

If, during operation, the error code E... plus
number or letter) appears on the LCD: Switch
the machine off and on again. Reset pro-
Problem
Dryer does not work.
Drying results unsatisfactory.
Loading door does not close.
When a button is pressed, Err
appears on the LCD.
Drum light does not work.

Clean operating screen and housing

gramme. Press the START / PAUSE button
If the error is still displayed, please inform
your local Service Force Centre and quote
the error code.
Possible cause
Mains plug is not plugged in or
fuse is not working correctly.
Loading door is open.
Have you pressed the START /
PAUSE button?
Wrong programme selected.
Filter clogged.
Overloading of laundry.
Ventilation slots covered up.
Residue on inside surface of
drum or drum ribs.
Conductance of water at instal-
lation site differs from standard
setting of machine.
Filter not in place.
Washing protection. After the
start of the programme, the op-
tion can no longer be set.
Programme selector in "O"
(OFF) position.
Defective light bulb.
than expected when removed from the
dryer.
Use a standard domestic cleaner (e.g.
vinegar-based cleaner) to wipe down the
inside of the drum and drum ribs.
Caution! Do not use furniture cleaners
or aggressive cleaning agents to clean
the machine.
Use a damp cloth to wipe down the op-
erating screen and housing.
Plug in at mains socket. Check
fuse in fuse box (domestic in-
stallation).
Close loading door.
Press the START / PAUSE but-
ton again.
Select a different programme
the next time you dry (see "Pro-
gramme chart" chapter).
Clean filter.
Observe recommended loading
volumes.
Uncover ventilation slots.
Clean inside surface of drum
and drum ribs.
Re-programme standard setting
for degree of drying (see 'Pro-
gramming options' chapter).
Install filter into place.
Turn the programme knob to
"O" (OFF) . Set the programme
again.
Turn programme selector to any
programme.
Replace light bulb (see next sec-
tion).
electrolux 11
Remedy