Fan Only Mode; Automatic Mode; Fan Speed; Clock - EdgeStar AP12005ECO Owner's Manual

Fan Only Mode

NOTE: Fan Only mode does
not require that the exhaust
hose be attached.

Automatic Mode

Fan Speed

Clock

TIP: Use the Chart below:
12-Hour 24-Hour
1:00 PM 13:00
2:00 PM 14:00
3:00 PM 15:00
4:00 PM 16:00
5:00 PM 17:00
6:00 PM 18:00
7:00 PM 19:00
8:00 PM 20:00
9:00 PM 21:00
10:00 PM 22:00
11:00 PM 23:00
12:00 AM 00:00
13
Fan Only mode is used to circulate the air in your room. No temperature
setting is needed. The front panel lights will be green.
To operate the unit in Fan Only mode:
1) Make sure the power cord is plugged into a power outlet.
2) Press the Power button on the remote control.
3) Press the Mode button until the
4) Press the Speed button to select the fan speed. You can choose
between Automatic,
In Automatic mode, the unit will cool, dehumidify, or heat (some models)
depending on the ambient temperature. As the temperature in the room
changes, the mode and fan speed will change automatically. The front
panel lights will change depending on the mode.
To operate the unit in Automatic mode:
1) Make sure the power cord is plugged into a power outlet.
2) Press the Power button on the remote control.
3) Press the Mode button until the
selected.
The Fan Speed button is used to change the fan speed while in
Cooling and Fan Only modes.
Press the Fan Speed button to select the fan speed. The
Automatic, High,
Note: You will not be able to change the fan speed if the unit is in
Automatic or Dehumidify mode.
The Clock button is used to set the Clock.
To set the Clock:
1) Press and hold the
blinking.
2) Set the time by using the
down the buttons longer than 1 second will change the time in fast mode.
The clock is a 24-Hour clock so if it is 6:00 PM you would set the time to
be 18:00.
3) To save your settings press and hold the
Clock indicator stops blinking.
High, Medium and Low.
Medium or Low indicator can be selected.
Clock button until the Clock indicator starts
Up and
Fan Only indicator is selected.
Automatic indicator is
Down buttons. Holding
Clock button until the