Preparation For Use; Unpacking And Setup; Power Source - Emerson ES11 Owner's Manual

UNPACKING AND SET UP
• Remove the main unit, the speakers, and the remote control from the carton,
and remove all packing materials from the individual components.
• Carefully remove any small strips of tape from the main unit that may have
been used to prevent the CD door from opening in transit.
• Press the CD door in the area marked "OPEN/CLOSE" to open the door.
Carefully remove the transit protection card from the CD player and close the
CD door.
• Completely unwind the AC power cord and the FM lead wire antenna, and
extend both cords to their full lengths.
• Place the main unit and speakers on a stable, level shelf, desk, table etc,
convenient to a 120V 60 Hz AC outlet, out of direct sunlight, and away from
areas of excess heat, dust, moisture, or vibration.

POWER SOURCE

This system is designed to operate only on 120V 60Hz AC house current.
Connecting this system to any other power source may cause damage to the system,
and such damage is not covered by your warranty.
NOTE: This system has a polarized AC
plug with one wide blade and one narrow
blade. This plug will only fit into a matching
polarized AC outlet. This is a safety feature
to reduce the possibility of electric shock.
If this plug will not fit in your AC outlet, you
probably have an outdated non-polarized
outlet. You should have your outdated outlet changed by a qualified, licensed
electrician. Do not file the wide blade on the plug, or use an adapter to make the
plug fit into your outlet. This defeats the safety feature and could expose you to
electric shock.
ES11_ib022503.p65

PREPARATION FOR USE

4
4
AC Outlet
AC Plug
25/2/2003, 16:05