Preparation For Use; Unpacking And Setup; Power Source - Emerson ES13 Owner's Manual

UNPACKING AND SET-UP
•
Carefully remove the unit from the carton and remove all packing material
from the unit.
•
Remove any labels or stickers which may be on the front or top of the set, but
do not remove any labels from the back or bottom.
•
We suggest that you retain the original carton and packing materials in case it
ever becomes necessary to return your unit for service. This is the only sure
way to protect the unit from damage in transit.
•
If you do dispose of the carton and packing materials, please do so properly.
Emerson cares about our environment.

POWER SOURCE

This system is designed to operate on 120V 60Hz AC house current . Connecting
this system to any other power
supply could result in damage to the
unit which is not covered by your
warranty. You will note that this
system is equipped with a polarized
AC power plug having one blade
wider than the other. This is a safety
feature. If this plug does not fit into
your existing AC outlet, do not try to defeat this safety feature by filing the wide
blade to make it fit into your outlet. If this plug will not fit into your outlet, you
probably have an out-dated non-polarized AC outlet. You should have your outlet
changed by a qualified licensed electrician.
AC OPERATION
1.) Unwind the AC Power Cord completely.
2.) Insert the plug into any convenient 120V 60Hz AC outlet.
FM Antenna
ES13_draft090902.p65

PREPARATION FOR USE

4
4
AC Outlet
AC Plug
AC Outlet
9/9/2002, 17:37