Programmed Playback - Emerson ES11 Owner's Manual

PROGRAMMED PLAYBACK

You can program up to 20 tracks on a disc to play in any desired order. This allows
you to omit the tracks you do not like, and have the tracks you do like play multiple
times if desired.
NOTE: You cannot program the player during playback. If the disc is playing press
the STOP button first and when the total tracks and playing time appear on the
display follow the programming steps below.
1.) Press the MEMORY button on the front panel or on the
remote control. The display will show Program Memory
Number 01 (P – 01), Track Number 01, and the TRACK
MEMORY indicator will be flashing.
2.) Press the R-SKIP
first track to be programmed. Example: Track Number 7.
3.) When the desired track number appears in the display press
the MEMORY button again to enter the desired track in
Program Memory Number 01. The Program Memory
Number advances to P-02.
4.) Repeat steps 2 and 3, selecting a different track number each time until you
have entered up to 20 tracks in the program memory.
After you have programmed the desired tracks press the PLAY/
PAUSE button to begin Programmed Playback. The
MEMORY indicator stops flashing and remains ' On' . The tracks
you selected will be played in the desired order. After the last
programmed track has played the player stops but the program
remains in the memory.
ES11_ib022503.p65
or F-SKIP buttons to select the
18
18 25/2/2003, 16:05