Connecting Your Components - Onkyo HT-S5600 Owner's Manual

Connecting Your Components

Connect your components to the appropriate jacks. The
default input assignments are shown below.
See "Connection Tips and Video Signal Path" for more
information (➔ page 62).
The on-screen menus appear only on a TV that is
connected to the HDMI OUT. If your TV is connected
to other video outputs, use the AV receiver's display
when changing settings.
✔: Assignment can be changed
No. Jack/Port Components
AUX INPUT
VIDEO Camcorder, etc.
AUDIO L/R
USB, AUX INPUT iPod/iPhone (video
*1
VIDEO playback)
*2 iPod/iPhone, MP3 player,
USB
USB flash drive
DIGITAL IN
OPTICAL (TV/CD) TV, CD player
COAXIAL 1 (BD/DVD) Blu-ray Disc/DVD player
COAXIAL 2 (CBL/SAT) Satellite/cable set-top box,
RI dock, etc.
COMPONENT VIDEO
IN 1 (BD/DVD) Blu-ray Disc/DVD player,
RI dock
IN 2 (CBL/SAT) Satellite/cable set-top box,
RI dock, etc.
OUT TV, projector, etc.
MONITOR OUT TV, projector, etc.
BD/DVD IN Blu-ray Disc/DVD player
VCR/DVR IN VCR, DVD recorder/
digital video recorder, RI
dock
CBL/SAT IN Satellite/cable set-top box,
etc.
GAME IN Game console, RI dock
TV/CD IN TV, CD player, cassette
tape deck, MD, CD-R,
Turntable *3
En-15
Note
*1 When USB input is selected, you can input video signals from
the AUX INPUT VIDEO jack. Video signals input from AUX
INPUT VIDEO will be output from the MONITOR OUT jack.
*2 Do not connect the AV receiver's USB port to a USB port on
(➔ pages 38, 39). your computer. Music on your computer cannot be played
through the AV receiver in this way.
*3 Connect a turntable (MM) that has a phono preamp built-in. If
your turntable (MM) doesn't have it, you'll need a
commercially available phono preamp.
If your turntable has a moving coil (MC) type cartridge, you'll
need a commercially available MC head amp or MC
transformer as well as a phono preamp. See your turntable's
manual for details.
• With connection
DTS. (To record or listen the audio in Zone 2 as well, use
and .)
✔
• With connection
✔
from external components while you are in Zone 2.
✔
• With connection
both the main stereo and multichannel outputs, be sure to
connect to the main stereo.
✔
■
How to record a video source
✔
With the connections described above, you cannot record
the videos through the AV receiver. See "Recording" about
connections for video recording
, RI dock
Connections
, you can enjoy Dolby Digital and
, you can listen to and record audio
, if your Blu-ray Disc/DVD player has
(➔ page 35).