Chapter 5 Start Using - Dukane DVP508 User Manual

Chapter 5 Start Using

<Note>: Please adjust it to be suitable for the local voltage frequency of
50/60Hz. For the frequency in actual use, please refer to the
manual.
1. Remove the lens cap.
2. Pull up the camera and the camera arm. The camera should aim at the
center of the presenter.
3. Pull up the lamp arm to a proper position.
4. Place an object to be displayed under the camera.
5. Press [POWER]
6. Press [AUTO TUNE]
You are ready to present.
7. Each time the camera head is moved, press [AF]
control or control panel to refocus the lens.
<Note>: According to your request, you can adjust the camera head
slightly to aim at the center of the documents when the anchor
of lens was reached.
 When using the remote control, aim at the receptor on the DVP508, and
press the power button.
 Once DVP508 is turned on, the LED on the control panel will flash a few
times and stay lit. Please contact your distributor if the LED is not on.
(Attachment 1)
on the remote control or control panel to power on.
on the control panel to optimize the image.
on the remote
English - 14