6.4
Installing the ventilation system
L 100
To install the ventilation grilles, cut two rectangles (451mm x 156mm) in the
outer wall of the vehicle (for position of the cuts, see point 6.3).
1. Seal the mounting frame, making it waterproof.
2. Insert the frame ...
3. Insert the ventilation grilles.
L 200
Item 1 does not apply for installation framess with an
integrated seal.
5. Clip the extractor insert in position
(only for upper ventilation system L100)
6. Insert winter cover
22
... and screw into position.
4. Lock the ventilation grilles.