Figure 12 Communication With Ups Failed; Figure 13 Firmware Not Compatible With Ups Screen - Emerson Liebert Remote Monitoring Panel User Manual

Figure 12 Communication with UPS failed

If the RMP is functioning properly and the connection with UPS is correct, but the UPS does not sup-
port the communication function with RMP, then the RMP will display a the screen shown in
Figure 13 to report "Firmware is not Compatible with UPS."

Figure 13 Firmware not compatible with UPS screen

If the RMP determines that the UPS firmware is not compatible, after loading all messages available
from the UPS, the RMP will display the screen shown in Figure 13.
2006-01-22
Liebert NX
Unit #1
30kVA-3X3
Main
Bypass
A(AB)
Vphase V
120
Communication with UPS
Iphase A 20.5
Failed
Freq. Hz
50.1
CommErrID=0x01
Vline V
208
P. F. 0.99
Input breaker closed 01-12 12:28:16
Manual turn on 01-12 12:30:06
UPS in normal mode 01-22 12:30:16
F1 F2 F3
2006-01-22
Liebert NX
Unit #1
30kVA-3X3
Main
Bypass
A(AB)
Vphase V
120
Firmware is not
Iphase A 20.5
Compatible with UPS
Freq. Hz
50.1
RMP:Vxxx UPS:Vxxx
Vline V
208
P. F. 0.99
Input breaker closed 01-12 12:28:16
Manual turn on 01-12 12:30:06
UPS in normal mode 01-22 12:30:16
F1 F2 F3
10
12:30:36
Normal
Output
B(BC) C(CA)
120
120
20.5 20.5
50.1 50.1
208
208
0.99 0.99
?
F4 HELP
12:30:36
Normal
Output
B(BC) C(CA)
120
120
20.5 20.5
50.1 50.1
208
208
0.99 0.99
?
F4 HELP
Operation