Advertisement
"IMPORTANT" - PERFORM SAFETY CHECKS AFTER MAKING ANY REPAIRS OR ADJUSTMENTS
1. After reassembly, while seated on mow.er, attempt to start engine with mo wer
deck engaged. Engine should not start. If engine does start, return the
mower to an Authorized Dixon Dealer for adjustment or repair.
2. Disengage mower deck and start engine. With the operator in the normal
seated position, engage mower deck and r emove weight from seat. The engine
should stop. If the engine does not stop when operator rises from seat,
return the mower to an Authorized Dixon Dealer for adjustment or repair.
3. Engage, then disengage, mower blade in each cutting height. Insure th at blade
disengages and comes to a stop within (5) seconds in each height position.
If blade does not disengage properly, contact your Authorized Dixon Dealer.
PARKING BRAKE ADJUSTMENT
1.
Raise upper body to the open position.
2.
Tighten nut on brake rod CP/N 2533) located in front of the transaxle on each
side, just enough to prevent brake from slipping when engaged. CAUTION: Over
tightening may cause premature wear on the brake bank CP/N 5085),
REMOVING THE MOWER BLADE
Secure blade (P/N 2483) from turning. Remove blade bolt from center (P/N
3268), lock washer (P/N 3065) and blade washer (P/N 6113), then blade (P/M
2483). To reinstall, reverse above procedure. WARNING: Sharp edges on blade
can cause injury!
Caution should be exercised when service is required on blade.
(P/N 8112)
DIXON INDUSTRIES, INC
A BLOUNT COMPANY
AIRPORT INDUSTRIAL PARK
PO BOX 1569
COFFEYVILLE KS 67337 O945
316 251 2OOO
FAX 316 251 4117
Advertisement
