Delta Electronics RTU-EN01 Operation Manual page 33

Modbus TCP Remote I/O Communication Module RTU-EN01
Parity
Data length
Stop bits
Station address:
The Modbus address.
2. Bit device
For setting up the addresses for the bit type serial slave device and reading or the content in the
designated slave.
Station address:
Enter the address of slave to be monitored. (Max. 16 slaves)
MODBUS (Hex):
Enter the 4-digit hex Modbus address of the slave to be monitored.
MODBUS (Dec):
Enter the 6-digit decimal Modbus address of the slave to be monitored.
Account:
Enter the number of slaves to be monitored continuously (Max. 100).
DVP-PLC Operation Manual
31