Programmed Playback - Emerson HD7998 Owner's Manual

Programmed Playback

You can program up to 20 tracks on a disc to play in any desired order.
Note: You can program a disc either during playback or in Stop mode.
1.) Press the PROG button once.
The PGM indicator and the Track
number "00" will flash and the
Program number "01" appears in the
display.
2.) Press the or
the first track to be programmed.
Example: Track # 03.
3.) When the desired track number flashes in the display press the PROG button
again to enter the desired track number in Program Number "01".
The Program number advances to
"0 2".
4.) Repeat Steps 2 and 3 to program additional tracks up to a maximum of 20.
5.) Press the PLAY/PAUSE button to begin programmed playback.
The PGM indicator stops flashing.
• Playback begins with the first track you programmed and continues until all
programmed tracks have been played, and then the player stops.
• The programmed sequence will remain in the memory until the power shuts
off (approximately 30 seconds) or until the CD door is opened.
• If you press the PROG and
shuts off the programmed sequence will play again.
HD7998_B081105.p65
button to select
PLAY/PAUSE buttons again before the power
15
15 11/8/2005, 15:05