Installing Your Vista 200 Phone
•
•
•
•
•
•
•
1
1
Connect the receiver and receiver
cord
.
5
Attach the language faceplate.
8
Fit the Discovery Card on the phone.
•
•
•
•
•
•
•
•
2
Desk Mount
Attach the wedge-shaped base in
desk mount or wall mount
6
Attach the receiver card and lens
(shiny-side down).
9
To find the
OPTIONS
•
•
•
•
•
•
•
•
3
Wall Mount
Connect the line cord
†
position.
7
Attach the memory key card and
lens (after saving numbers and
names in memory). The lens snaps
on and off so you can add numbers.
When you have power:
When you plug in your new phone, you may see a message on the display ask-
ing you to make a language selection. Read the directions on the display to
select one of two languages.
Vista 200 also runs a test to ensure that the phone cords are connected properly. If
the test fails, the display will prompt you to check the phone cords. Make sure
all connections are fastened securely.
key, slide the panel.
•
•
•
•
•
•
•
•
4
Connect the power adaptor
.
Wall Mount
For wall mounting, we recommend
†
that you use a wall mounting plate,
which your local telephone company
can install. The excess line cord fits
into the stand of the phone.
•
•
•
•
•
•
•
•
.
Need help?
Do you have a question about the Vista 200 and is the answer not in the manual?
Questions and answers