SIIG FireWire 800 + Hi-Speed USB Combo Quick Installation Manual page 9

Table of Contents

Advertisement

32-bit Windows Server 2003
Windows Server 2003 automatically installs it's
built-in FireWire 400 driver for the FireWire 800 + Hi-Speed
USB Combo. To get the full speed out of this controller,
install the FireWire 800 driver using the directions below.
1.
Insert the driver CD. Click Start, Run. Type
D:\setup32.exe, click OK. (Change D: to match
your CD-ROM drive letter)
2.
At the Welcome screen, click Next.
3.
At the License Agreement screen, click Yes.
4.
At the Destination Location screen, click Next.
5.
Select Complete, then click Next.
6.
At the Program Folder screen, click Next.
7.
At the Security Alert box, click Yes two times.
8.
At the Software Installation screen, click Continue
Anyway, then click Finish.
9.
Select the restart computer option, then click Finish.
64-bit Windows Server 2003
Windows Server 2003 automatically installs it's
built-in FireWire 400 driver for the FireWire 800 + Hi-Speed
USB Combo. To get the full speed out of this controller,
install the FireWire 800 driver using the directions below.
1.
Insert the driver CD. Click Start, Run. Type
D:\setup64.exe, click OK. (Change D: to match
your CD-ROM drive letter)
2.
At the Welcome screen, click Next.
3.
At the License Agreement screen, click Yes.
4.
At the Destination Location screen, click Next.
5.
Select Complete, then click Next.
9

Advertisement

Table of Contents
loading

Table of Contents