SpeechMike Barcode 5282 / 5284
For information about the buttons on the front
side of the SpeechMike, refer to the chapter for
the SpeechMike Pro or SpeechMike Classic.
Use the barcode scanner
Press the scan trigger button and scan the
barcode. When a barcode is recognized,
the SpeechMike will beep and the barcode
information is inserted into the currently
active application as if the barcode number
is typed in digit by digit.
The barcode scanner allows barcode scanning
from a distance of up to 30 cm / 12 inches.
The scan angle of the barcode scanner can be
adjusted in two positions by 25°.
Scan angle adjustment
Configure the barcode scanner
The SpeechMike barcode scanner is pre-
configured with the keyboard language US
English and the suffix "carriage return" (CR).
Before using the barcode scanner for the first
time, it is necessary to adapt it to your local
keyboard language. To change the scanner
configuration, start the application
on the installation CD.
For information about customizing the barcode
module, refer to the Advanced Barcode Scanner
Configuration manual on the installation CD
provided with your SpeechMike.