Adjusting The Sound; Adjusting Sound Settings - Insignia NS-42E470A13 User Manual

Insignia 42" 1080p LED TV
6 Press or to highlight an option, then press
ENTER or OK/ENTER to access the option. You
can select:
• Phase—Minimizes horizontal distortion.
• Reset Component Settings—Resets all
component video settings to factory mode.
7 Press or to adjust the option, or press
to select a setting.
8 Press MENU to return to the previous menu, or
press EXIT to close the menu.

Adjusting the sound

Adjusting sound settings

To adjust sound settings:
1 Press MENU. The on-screen menu opens.
Picture
Picture Mode
Brightness
Contrast
Color
Advanced Video
Reset Picture Settings
OK
MOVE
ENTER
Adjust settings to affect picture quality
2 Press or to highlight AUDIO, then press
ENTER or OK/ENTER. The Audio menu opens.
Audio
Sound Mode
Balance
Advanced Audio
Reset Audio Settings
OK
MOVE
ENTER
Adjust settings to affect sound quality
3 Press or to highlight an option, then press
ENTER or OK/ENTER to access the option. You
can select:
• Sound Mode—Selects the sound mode. You
can select:
• Standard—Balances treble and bass. This
setting is good for watching standard TV
broadcasts.
• Theater—Enhances treble and bass for a
rich sound experience. This setting is good
for watching DVDs, Blu-ray discs, and
HDTV.
• Music—Preserves the original sound. This
setting is good for listening to music.
• News—Enhances vocals for TV audio. This
setting is good for watching news
broadcasts.
PICTURE AUDIO CHANNELS SETTINGS PHOTOS
Energy Savings
50
46
78
SELECT PREVIOUS EXIT
MENU EXIT
PICTURE AUDIO CHANNELS SETTINGS PHOTOS
Standard
SELECT PREVIOUS EXIT
MENU EXIT
www.insigniaproducts.com
• Custom—Lets you manually adjust sound
settings.
Note
You can also press AUDIO one or more time select
the Sound Mode. We did not list the modes in this
note because they are list just above in the list.
or
• Balance—Adjusts the balance between the
left and right audio channels.
• Advanced Audio—Opens the
Audio · Advanced Audio menu where you can
adjust additional audio options.
Audio
Bass
Treble
TV Speakers
Digital Audio/SPDIF
MTS/SAP
Audio Language
Adjust low frequency sound
• Bass—Adjusts the low sounds.
• Treble—Adjusts the high sounds.
• TV Speakers—Selects where to play TV
audio. You can select On (default setting)
to play audio through TV speakers, or
select Off to play audio through the
speakers on an external audio system.
• Digital Audio/SPDIF—Sends digital audio
or
to an external audio system. You can select
PCM (to output audio in 2-channel stereo),
or RAW (to pass through the original
digital audio sound).
• MTS/SAP—(Analog channels only) Selects
the audio mode. You can select:
0
• Audio Language—(Digital channels only)
Selects an alternate audio language, if
available.
• Reset Audio Settings—Reset all audio
settings to factory defaults.
4 Press
to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Picture Audio Channels
Advanced Audio
OK
MOVE SELECT PREVIOUS
MENU
ENTER
• MONO—Select this option if there is
noise or static on weak stereo
broadcasts.
• STEREO—Select this option for
programs broadcast in stereo.
• SAP—Select this option to listen to a
secondary audio program, if available.
Note
You can also press MTS/SAP (remote
control model NS-RC05A-13) or SAP
(remote control model NS-RC01G-09)
one or more times to select the audio
mode.
or to adjust the option, or press
Settings Photos
32
32
On
PCM
Stereo
EXIT
EXIT
or
31