Using The Remote Control; Installing Remote Control Batteries; Aiming The Remote Control - Insignia NS-42E470A13 User Manual

Insignia 42" 1080p LED TV

Using the remote control

Installing remote control batteries

Remote control model NS-RC03A-13
To install remote control batteries:
1 While pressing the release latch on the back of
the remote control, lift the battery
compartment cover off the remote control.
2 Insert two AAA batteries into the battery
compartment. Make sure that you match the +
and – symbols on the batteries with the + and –
symbols in the battery compartment.
3 Replace the battery compartment cover.
Cautions
• Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
• Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• If the remote control is not going to be used for
an extended period of time, remove the
batteries.
Remote control models NS-RC05A-11 and NS-RC01G-09
To install the remote control batteries:
1 While pressing the release button on the battery
2 Insert two AA batteries into the battery
3 Replace the cover.

Aiming the remote control

To aim the remote control:
www.insigniaproducts.com
compartment cover on the back of the remote,
lift the cover off the remote.
compartment. Make sure that the + and –
symbols on the batteries align with the + and –
symbols in the battery compartment.
• Point the remote control towards the remote
sensor on the front of your TV.
23