Understanding The Basics; Turning Your Tv On Or Off; Selecting The Video Input Source; On-Screen Menu Overview - Insignia NS-42E470A13 User Manual

12 To watch TV, press INPUT, press
highlight the video input source for your TV in
the Input Source list, then press ENTER or
OK/ENTER.
• If your TV is connected to an antenna, cable TV
(no box), or cable or satellite TV box using a
coaxial cable, select TV.
• If your TV is connected to a cable or satellite
box using an HDMI cable or HDMI cable with a
DVI adapter, select HDMI 1, HDMI 2, or
HDMI 3.
• If your TV is connected to a cable or satellite
box using a component video cable, select
Component/AV.
• If your TV is connected to a cable or satellite
box using a composite video cable, select
Component/AV.

Understanding the basics

Turning your TV on or off

To turn your TV on or off:
1 Make sure that the power cord is connected to a
power outlet.
2 Press (power) to turn on your TV. The power
indicator turns blue.
3 Press (power) again to turn off your TV. Your
TV enters standby mode, and the power
indicator LED turns red.
Warning
When your TV is in standby mode, it is still receiving
power. To completely disconnect power, unplug the
power cord.
Note
If your TV does not receive an input signal for several
minutes, it automatically goes into standby mode.

Selecting the video input source

To select the video input source:
1 Turn on your TV, then press INPUT. The Input
Source list opens.
Input Source
Component/AV
HDMI 1
HDMI 2
HDMI 3
2 Press or to select a video input source, then
press ENTER.
26
or to
TV
VGA
USB
www.insigniaproducts.com
NS-42E470A13 Insignia 42" 1080p LED TV
You can also press a Quick Launch Input button
to select the video input source.
• Press TV to select TV (if your TV is connected
to an antenna, cable TV (no box), or cable or
satellite TV using a coaxial cable).
• (Remote control model NS-RC03A13) Press
VIDEO to select component or composite
input.
• (Remote control models NS-RC05A-11 and
NS-RC01G-09) Press COMP to select
component input.
• (Remote control models NS-RC05A-11 and
NS-RC01G-09) Press VIDEO to select
composite input.
• Press HDMI one or more times to cycle
between the HDMI inputs.

On-screen menu overview

Notes
• Depending on the signal source selected, you
may see different options on your screen. The
following menus are shown in TV mode (except
the Photos menu).
• Menu items that are not selectable are grayed
out.
• Menus in this manual are described in TV mode,
unless otherwise indicated.
• The screens shown in this manual are for
explanation purposes and may vary from the
actual screens on your TV.
Picture menu (TV mode)
Picture
Picture Mode
Brightness
Contrast
Color
Advanced Video
Reset Picture Settings
OK
MOVE
ENTER
Adjust settings to affect picture quality
Audio menu (TV mode)
Audio
Sound Mode
Balance
Advanced Audio
Reset Audio Settings
OK
MOVE
ENTER
Adjust settings to affect sound quality
PICTURE AUDIO CHANNELS SETTINGS PHOTOS
Energy Savings
50
46
78
SELECT PREVIOUS EXIT
MENU EXIT
PICTURE AUDIO CHANNELS SETTINGS PHOTOS
Standard
SELECT PREVIOUS EXIT
MENU EXIT
0