Table of Contents
Advertisement
Understanding the basics
This section covers basic information for:
• Turning your TV on or off
• Selecting the video input source
• On-screen menu overview
• Navigating the menus
• Selecting a channel
• Adjusting the volume
• Viewing channel information
Turning your TV on or off
1 Make sure that the power cord is connected to a
power outlet.
2 Press
(power) to turn on your TV. The power
indicator turns off.
3 Press
(power) again to turn off your TV. Your TV
enters standby mode, and the power indicator
turns red.
Warning
When your TV is in standby mode, it is still
receiving power. To completely disconnect
power, unplug the power cord.
Note
If your TV does not receive an input signal
for several minutes, it automatically goes
into standby mode.
Selecting the video input source
1 Turn on your TV.
2 If you want to use a device connected to a video
3 Press INPUT.
4 Press
www.insigniaproducts.com
Note
Your TV automatically detects and displays
which video jacks have devices connected
to them when the devices are turned on.
You can turn this feature off to always
display all inputs. For more information,
see
Turning Input Sensor on or off
page 59.
input (such as a DVD or Blu-ray player), turn on the
device.
or
to select a video input source, then
press ENTER.
32" 720p 60Hz LED TV
on
33
Advertisement
Table of Contents
