Table of Contents
Advertisement
Connections
If your TV has AUDIO/VIDEO input jacks, see the following instructions.
Connection to a TV
Basic Audio
TV
L
(INPUT)
Audio cable
(supplied)
This unit
(OUTPUT)
(Analog)
AUDIO OUT
Hint
Hint
• Connect this unit directly to the TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted
due to the copy protection system.
After you have completed connections
• Hit the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input channel (usually
near channel 0) for viewing the picture from this unit. If the picture does not appear, also refer to the manual accompanying your TV.
INPUT MODES FOR COMMON TV BRANDS (Example)
• Listed below are inputs for common brand name TV's.
Admiral:
AUX
Curtis Mathis:
LINE1, LINE2, 00, 90, 91, 92, 93
GE:
INPUT, TV/VCR, 00, 90, 91, 92, 93
Hitachi:
INPUT, AUX
JVC:
A/V CHANNEL, INPUT1, SVIDEO,
INPUT2
Kenwood:
AUX
LXI-Series:
00
Magnavox:
AUX CHANNEL
RF Modulator Connection
If your TV has Antenna in jack only, it is still possible to
connect this unit to your TV by using a STEREO
AUDIO/VIDEO RF Modulator (commercially available).
In this case, follow the instructions below.
1) Connect the AUDIO/VIDEO output jacks of this unit to the
AUDIO/VIDEO input jacks of your RF Modulator by audio
and video cables.
2) The antenna input jack of your TV may have been already
occupied. If so, disconnect the RF cable from your TV, and
then connect the RF cable to your RF Modulator (usually
marked "ANT IN").
3) Connect your RF modulator to your TV by another RF cable.
4) Set your RF modulator's channel 3/4 switch to either 3 or
4, whichever the TV channel is least used in your area. If
your RF modulator has a Modulator/Antenna switch, set it
according to your RF modulator's manual.
5) Turn on your TV and choose the same channel as you set
the RF modulator's channel 3/4 switch to.For more details,
follow the instructions supplied with the RF Modulator.
AUDIO IN
R
(supplied)
Setup
Method 1
Good picture
VIDEO IN
Video
cable
or
VIDEO OUT
Panasonic:
RCA:
Samsung:
Sanyo:
Sharp:
Sony:
Toshiba:
Zenith:
Antenna
Cable
Signal
Stereo Audio/Video RF Modulator
(commercially available)
AC 120V
ANT IN
CHANNEL
3
2
Hint
Hint
The quality of picture may become poor if the unit is con-
•
nected to an RF Modulator.
– 6 –
Method 2
Better picture
S-VIDEO IN
S-Video
cable
(commercially
available)
S-VIDEO OUT
TV/VIDEO
INPUT, TV/VCR, 00, 90, 91, 92, 93
TV/VIDEO
VIDEO
00
VIDEO1, VIDEO2, VIDEO3
TV/GAME
00
(Back of this unit)
1
TO TV
VIDEO
AUDIO
4
R
L
Audio/Video
Cables
(Supplied)
RF Cable (Not supplied)
3
(Back of TV)
Antenna in jack
EN
Advertisement
Table of Contents
