OWNER’S MANUAL DVD PLAYER EWD 7002 INSTRUCCIONES EN ESPAÑOL INCLUIDAS. If you need additional assistance for set-up or operating after reading owner’s manual, please call TOLL FREE : 1 - 800 - 256-2487 Please read before using this equipment.
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SER- VICEABLE PARTS INSIDE.
IMPORTANT SAFEGUARDS 1) Read Instructions - All the safety and operating instruc- tions should be read before the product is operated. 2) Retain Instructions - The safety and operating instructions should be retained for future reference. 3) Heed Warnings - All warnings on the product and in the operating instructions should be adhered to.
The serial number of this product may be found on the back of the DVD player. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft.
User can resume to playback from the part at which the play was stopped even if the power turn off. ¡ Component Video Out Jacks Jacks located on the back of the DVD Player which are used to send high-quality video to a TV via Component Video In Jacks. ¡...
OPERATING CONTROLS AND FUNCTIONS FRONT PANEL REMOTE CONTROL SEARCH OPEN/ POWER DISPLAY MODE CLOSE AUDIO TITLE ANGLE REPEAT CLEAR PAUSE SKIP PLAY STOP SETUP TITLE MENU MODE ENTER ZOOM RETURN 1. Display, Remote Sensor Window 2. PLAY Button [page 13] Starts playback of the disc contents.
REAR VIEW 31. Power Cord 32. COAXIAL DIGITAL AUDIO OUT Jack 33. Right AUDIO OUT Jack 34. Left AUDIO OUT Jack DISPLAY Stays on when the A-B repeat function is on. Lights up when a DVD is inserted on the tray. Stays on when the repeat function is on.
Stereo system Notes ¡ Connect the DVD player directly to a TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system. ¡ Be sure to turn off the power to all components in the system before connecting another component.
CONNECTING TO A DOLBY DIGITAL DECODER OR DTS DECODER If using this DVD player to playback a DVD in a 5.1 channel Dolby Digital surround, DTS surround format, the DVD player outputs a Dolby Digital, or DTS data stream from its COAXIAL DIGITAL AUDIO OUT jack. By...
Note ¡ The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal through an RF Modulator. To S-VIDEO OUT jack To VIDEO OUT jack...
Turn on the power of the TV, amplifier and any other components which are connected to the DVD player. (Change the input system to suit the DVD player, and check that the sound volume is correct.) Press the POWER button.
USING THE TITLE MENU With a DVD containing a title menu, you can select desired titles from the menu. Press the TITLE button. ¡ The title menu will appear. Select the desired title. ¡ Press the arrow buttons ( /B/s) to change the setting, and then press the ENTER button.
FAST FORWARD/REVERSE Press the FWD or REV ing playback. ¡ For DVDs, pressing the FWD g or REV h but- ton cycles the playback speed in four steps. In case of DVDs, the sound will mute. ¡ For audio CDs, the playback speed is ×16 fixed. Button Press the PLAY button to return to normal playback speed.
STARTING FROM A DESIRED TIME COUNT Press the SEARCH MODE button twice. Press the numeric buttons to set the desired time count. ¡ Example: 1 hour, 23 minutes and 30 seconds 1 → 2 → 3 → 3 → 0 Notes ¡...
REPEAT Press the REPEAT button. For DVDs ¡ A single title or chapter is played back repeatedly. ¡ Pressing the REPEAT button cycles the display on the screen as follows. REPEAT [OFF] REPEAT [CHAPTER] REPEAT [TITLE] For audio CDs ¡ The whole disc or a single track is played back repeatedly.
PROGRAM (Audio CD) Press the MODE button in stop mode. ¡ The program screen will appear. Press the numeric buttons to enter the desired track numbers. ¡ 50 programs can be displayed at once on the screen. Press “ ” to go to the next page. Press the PLAY button.
PLAYING AN MP3 DISC Insert an MP3 file-recorded disc. ¡ The MP3 menu screen shows up. ¡ Folders are referred to as “ALBUMS” and files are referred to as “TRACKS”. ¡ “+” appears at the beginning of the album name. ¡...
PLAYING AN MP3 DISC FROM A DESIRED TRACK Press the SEARCH MODE button during play- back. ¡ The SEARCH menu shows up. ¡ The Track currently in play or under RESUME ON will be highlighted. In the case of RESUME OFF, the first track of the disc will be highlighted.
CHANGING THE AUDIO LANGUAGE OR SOUND MODE The DVD player has a function which allows you to select the desired audio language and sound mode. For DVDs Press the AUDIO button during playback, and then press the AUDIO button to select the desired audio language.
CHANGING THE SUBTITLE LANGUAGE The DVD player has a function which allows you to select the desired language for subtitles. Press the SUBTITLE button during playback, and then press the SUBTITLE button to select the desired subtitle language. ¡ The subtitle language can be changed if the subtitles are recorded in multiple languages on the DVD being played.
CHANGING THE ON-SCREEN DISPLAY You can check the information about the disc by pressing the DISPLAY button on the remote control. For DVDs Press the DISPLAY button during playback. CH 7/49 0:01:46 -0:03:27 CH(Chapter): Current chapter number / the number of total chapter.
CHANGING THE SETUP ITEMS LANGUAGE SETTINGS Press the SETUP button in STOP mode. ¡ The setup screen will appear. SET-UP 1.LANGUAGE 2.DISPLAY 3.AUDIO 4.PARENTAL SELECT: SET: EXIT: SETUP CANCEL: Press the buttons to select Language, and then press the ENTER button. SET-UP 1.LANGUAGE 2.DISPLAY...
DISPLAY SETTINGS Press the SETUP button in STOP mode. ¡ The setup screen will appear. SET-UP 1.LANGUAGE 2.DISPLAY 3.AUDIO 4.PARENTAL SELECT: SET: EXIT: SETUP CANCEL: Press the buttons to select DISPLAY and then press the ENTER button. SET-UP 1.LANGUAGE 2.DISPLAY 3.AUDIO 4.PARENTAL SELECT:...
AUDIO SETTINGS Press the SETUP button in STOP mode. ¡ The setup screen will appear. Press the buttons to select Audio and then press the ENTER button. Press the buttons to select an item, and then press the ENTER button. DRC (Default : OFF) On : DRC (Dynamic Range Control)
PARENTAL LOCK Press the SETUP button in STOP mode. ¡ The setup screen will appear. SET-UP 1.LANGUAGE 2.DISPLAY 3.AUDIO 4.PARENTAL SELECT: SET: EXIT: SETUP CANCEL: Press the buttons to select PARENTAL, and then press the ENTER button. SET-UP 1.LANGUAGE 2.DISPLAY 3.AUDIO 4.PARENTAL SELECT:...
LANGUAGE CODE LIST Language Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali;Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish [DAN] German [GER] Bhutani Greek [GRE] English [ENG] Esperanto Spanish [SPA] Estonian Basque Persian Finnish [FIN] Fiji Faroese French [FRE]...
TROUBLESHOOTING GUIDE If the DVD player does not perform properly when operated as instructed in this Owner's Manual, check the player, consulting the following checklist. Symptom ¡ Loose power plug. No power ¡ The remote control is not aimed at the sensor on the player.
CABINET CLEANING ¡ Wipe the front panel and other exterior surfaces of the DVD player with a soft cloth immersed in lukewarm water and wrung dry. ¡ Never use a solvent or alcohol. Do not spray insecticide liquid near the DVD player. Such chemicals may cause damage and discoloration to the exposed surfaces.
Product type : DVD Player Discs : DVD video Audio CD Output signal format : NTSC color Frequency response DVD (linear sound) : 20 Hz to 22 kHz (sample rate: 48 kHz) 20 Hz to 44 kHz (sample rate: 96 kHz)
CONTROLES DE OPERACIÓN Y FUNCIONES PANEL DELANTERO MANDO A DISTANCIA SEARCH OPEN/ POWER DISPLAY MODE CLOSE AUDIO TITLE ANGLE REPEAT CLEAR PAUSE SKIP PLAY STOP SETUP TITLE MENU MODE ENTER ZOOM RETURN 1. Visualizador, ventana del sensor del mando a distancia 2.
VISTA TRASERA 31. Cable de alimentación 32. Toma de salida de audio digital coaxial (COAXIAL DIGITAL AUDIO OUT) 33. Toma de salida de audio derecha (AUDIO OUT) VISUALIZACIÓN Permanece encendido cuando está activada la Se enciende cuando se inserta un función de repetición A-B.
CONEXIÓN A UN TELEVISOR Consulte la figura 1 de la página 10 PARA TELEVISORES CON TOMA DE ENTRADA DE VÍDEO S Utilice un cable de vídeo S (de venta en el comercio) en lugar del cable de vídeo amarillo para disfrutar de imágenes de más alta calidad.
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE. To locate your nearest Emerson Authorized Service Center or general service procedure, please call 1- 800-256-2487 or write to the following: PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.