Emerson EWD7003 Owner's Manual

Emerson owner's manual dvd player ewd7003
Hide thumbs

Advertisement

Quick Links

Table of Contents
OWNER'S
MANUAL
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION :
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

IMPORTANT SAFEGUARDS

1) Read Instructions - All the safety and operating instructions
should be read before the product is operated.
2) Retain Instructions - The safety and operating instructions
should be retained for future reference.
3) Heed Warnings - All warnings on the product and in the oper-
ating instructions should be adhered to.
4) Follow Instructions - All operating and use instructions should
be followed.
5) Cleaning - Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
6) Attachments - Do not use attachments not recommended by
the product manufacturer as they may cause hazards.
7) Water and Moisture - Do not use this product near water - for
example, near a bath tub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming pool; and the like.
8) Accessories - Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall, causing
serious injury to a child or adult, and serious damage to the
product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the product.
Any mounting of the product should follow the manufacturer's
instructions, and should use a mounting accessory recom-
mended by the manufacturer.
9) A product and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause the
product and cart combination to overturn.
10)Ventilation - Slots and openings in the cabi-
net are provided for ventilation and to
ensure reliable operation of the product and
to protect it from overheating, and these
openings must not be blocked or covered.
The openings should never be blocked by placing the product
on a bed, sofa, rug, or other similar surface. This product
should not be placed in a built-in installation such as a book-
case or rack unless proper ventilation is provided or the manu-
facturer's instructions have been adhered to.
11)Power Sources - This product should be operated only from the type
of power source indicated on the marking label. If you are not sure
of the type of power supply to your home, consult your product deal-
er or local power company. For products intended to operate from
battery power, or other sources, refer to the operating instructions.
12)Grounding or Polarization - This product may be equipped with
a polarized alternating-current line plug (a plug having one blade
wider than the other). This plug will fit into the power outlet only
one way. This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.
13)Power-Cord Protection - Power-supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon
DVD PLAYER
EWD7003
14)Lightning - For added protection for this product during a light-
15)Power lines - An outside antenna system should not be locat-
16)Overloading - Do not overload wall outlets, extension cords, or
17)Object and Liquid Entry - Never push objects of any kind into
18)Servicing - Do not attempt to service this product yourself as
19)Damage Requiring Service - Unplug this product from the wall
PORTABLE CART WARNING
(Symbol provided by RETAC)
S3125A
20)Replacement Parts - When replacement parts are required, be
21)Safety Check - Upon completion of any service or repairs to this
22)Heat - The product should be situated away from heat sources
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
If you need additional assistance for set-up or operating
after reading owner's manual, please call TOLL FREE : 1 - 800 - 256-2487
or visit our web site at http://www.funai-corp.com
Please read before using this equipment.
EMERSON AND THE G-CLEF LOGO ARE
REGISTERED TRADEMARKS OF
EMERSON RADIO CORP., PARSIPPANY,
NEW JERSEY, U.S.A.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral trian-
gle is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
or against them, paying particular attention to cords at plugs, conve-
nience receptacles, and the point where they exit from the product.
ning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent damage to the
product due to lightning and power-line surges.
ed in the vicinity of overhead power lines or other electric light
or power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching such power lines
or circuits as contact with them might be fatal.
integral convenience receptacles as this can result in a risk of
fire or electric shock.
this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
opening or removing covers may expose you to dangerous voltage
or other hazards. Refer all servicing to qualified service personnel.
outlet and refer servicing to qualified service personnel under
the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper adjust-
ment of other controls may result in damage and will often
require extensive work by a qualified technician to restore
the product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance
- this indicates a need for service.
sure the service technician has used replacement parts speci-
fied by the manufacturer or have the same characteristics as
the original part. Unauthorized substitutions may result in fire,
electric shock, or other hazards.
product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.

Advertisement

Table of Contents
loading

  Also See for Emerson EWD7003

  Related Manuals for Emerson EWD7003

  Summary of Contents for Emerson EWD7003

  • Page 1: Important Safeguards

    TOLL FREE : 1 - 800 - 256-2487 or visit our web site at http://www.funai-corp.com Please read before using this equipment. EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A.
  • Page 2: I Precautions

    PRECAUTIONS LASER SAFETY This player employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.
  • Page 3: Table Of Contents

    TABLE OF CONTENTS I PRECAUTIONS ......2 LASER SAFETY ......2 About Copyright.
  • Page 4: I Introduction

    DVD player with the same region code. For Customer Use: Read carefully the information located at the bottom of your DVD player and enter below the Serial No.Retain this informa- tion for future reference. Model No. DVD player Serial No.
  • Page 5: Disc Types

    ¡ Resume Play ¡ Virtual Surround ¡ Component Video Out Jacks Jacks located on the back of the DVD Player which are used to send high-quality video to a TV via Component Video In Jacks. ¡ Bit rate indication ¡...
  • Page 6: I Functional Overview

    VIDEO OUT VIDEO S-VIDEO OUT 10. DISC IN Indicator light appears when a disc is in the DVD player. 11. MAIN (AC Power Cord) connect to a standard AC outlet 12. COAXIAL (Digital audio out) connect to AUDIO inputs of a digital (coaxial) audio equipment 13.
  • Page 7: Loading The Batteries

    FUNCTIONAL OVERVIEW Loading the Batteries 1. Open the battery compartment cover. 2. Insert two AA batteries, with each one oriented correctly. 3. Close the cover. NOTES • Do not mix alkaline and manganese batteries. • Do not mix old and new batteries. HOOK UPS CAUTION: •...
  • Page 8: Connecting To An Amplifier Equipped With Digital Input Jacks Such As Md Deck Or Dat Deck

    HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TV’s 75-ohm coaxi- al antenna terminal using a commercially available Stereo Audio/Video RF Modulator. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna terminal on your TV.
  • Page 9: I Playing A Disc

    • A “prohibited icon” may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encoun- tered by the DVD player or the disc. • With DVDs that use some titles for play- back program signals, playback may start from the second title, or it may skip these titles.
  • Page 10: Fast Forward / Reverse Search

    PLAYING A DISC Fast Forward / Reverse Search DVD-V During playback, press FWDg g or REVh ly to select the required forward or reverse speed: x2, x8, x50, x100. • If you are using SKIP G / SEARCH g panel, press and hold it for more than 1.5 sec (the longer you hold it, the faster the speed will be) you reach the desired speed, release the button.
  • Page 11: Repeat Track

    DVD-V MP3 Playback When a CD with MP3 files is inserted in the DVD player, the MP3 menu will appear on the TV screen, and number of tracks is displayed on the front panel. In stop mode, press K or L to select the desired group or track.
  • Page 12: Track Selection

    • Press CLEAR to erase the incorrect input. Press PLAY to start programmed playback. Audio Language The DVD player allows you to select a language during DVD disc (if multi language available) playback. Press AUDIO during playback. Press AUDIO repeatedly to select your desired language.
  • Page 13: Parental Control

    DVD SETUP Audio Setting Choose the appropriate Audio settings for your equipment as it only affect during the playback of DVD discs of the DVD player. Press SETUP in STOP mode. Press B to select CUSTOM, then press ENTER. • CUSTOM mode will appear.
  • Page 14: Display Setting

    AUTO POWER OFF : • Press ENTER repeatedly to turn Auto Power ON or OFF. • The default setting is ON and it will turn the DVD player to off automatically after 35 minutes of no use. Press SETUP to exit.
  • Page 15: I Troubleshooting Guide

    TROUBLESHOOTING GUIDE If the DVD player does not perform properly when operated as instructed in this Owner's Manual, check the player, consulting the following checklist. Problem No power No picture Distorted picture Completely distorted picture or black/white picture with DVD...
  • Page 16: I Specifications

    Servicing • Should your DVD player become inoperative, do not try to correct the problem by yourself. There are no user-service- able parts inside. Turn off, unplug the power cord, and please call our help line at 1-800-256-2487, to locate an Authorized Service Center.
  • Page 17: I Controles De Operación Y Funciones

    CONTROLES DE OPERACIÓN Y FUNCIONES PANEL DELANTERO / VISTA TRASERA 1. Botón de la alimentación (POWER) Púlselo para conectar y desconectar la alimentación. 2. Botón de salto descendente/retroceso rápido (SKIP H/SEARCH h Púlselo para volver al capítulo o pista anterior durante la reproducción;...
  • Page 18: Instalación De Las Pilas

    CONTROLES DE OPERACIÓN Y FUNCIONES Instalación de las Pilas 1. Abra la tapa del compartimiento de las pilas. 2. Introduzca dos pilas AA con las polaridades colocadas correctamente. 3. Cierre la tapa. NOTAS • No mezcle pilas alcalinas y de manganeso. •...
  • Page 19: I Reproducción De Un Disco

    REPRODUCCIÓN DE UN DISCO Reproducción de un DVD de Vídeo o un CD de Audio Para empezar Conecte la alimentación del televisor, amplificador y cualquier otro componente que esté conectado al reproductor DVD. (Cambie el sistema de entrada para adaptarlo al reproductor DVD, y compruebe que el volumen del sonido sea correcto.) Pulse el botón POWER.
  • Page 20: Limited Warranty

    FUNAI CORP. will repair this Emerson product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase.

Table of Contents