Table of Contents
Advertisement
Reset to the Default Setting (Except for PARENTAL Setting)
1
1
SETUP
STOP
<SETUP MENU>
QUICK SETUP
PLAYER MENU
ENGLISH
TV ASPECT
4:3 LETTER BOX
DOLBY DIGITAL
BITSTREAM
Troubleshooting Guide
If the unit does not perform properly when operated as instructed in this Owner's Manual, check the unit consulting the fol-
lowing checklist.
Problem
No power
No sound or picture
Distorted picture
Completely distorted picture or
black/white picture with DVD
No sound or distorted sound
No audio at digital output
No DTS audio is output
Picture freezes momentarily
during playback
Disc can't be played
No return to start-up screen when
disc is removed
The unit does not respond to
the remote control
Buttons do not work or the unit stops
responding
The unit does not respond to some
operating commands during playback
The unit cannot read
CDs/DVDs
Angle does not switch
Playback does not start when the title is selected
The password for rating level has been forgotten
Disc cannot be inserted
Disc cannot be taken out
NOTES:
•
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner's Manual
for more details on correct operations.
•
Playback from a desired track and random playback are not available during program playback.
•
Some functions are prohibited on some discs.
2
2
or
ENTER
ENTER
ENTER
Select "INITIALIZE".
QUICK SETUP
PLAYER MENU
ENGLISH
TV ASPECT
4:3 LETTER BOX
DOLBY DIGITAL
BITSTREAM
Information
Solution
–Check if the AC power cord is properly connected.
–Unplug the outlet once, and wait for 5-10 seconds and then plug it in again.
–Check if the TV is switched on.
–Check the video connection.
–Check the VIDEO/AUDIO cable connections to the TV.
(See Connection to a TV)
–Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
–Connect the unit directly to the TV.
–Connect the unit directly to the TV.
–Make sure the disc is compatible with the unit.
–Adjust the volume.
–Check that the speakers are connected correctly.
–Check the digital connections.
–Check if the audio format of the selected audio language matches
your receiver capabilities.
–This unit does not support DTS audio.
This is not a malfunction.
–Check the disc for fingerprints/scratches and
clean with a soft cloth wiping from center to edge.
–Clean the disc.
–Clean the disc.
–Ensure the disc label is facing up.
–Check if the disc is defective by trying another disc.
–Cancel the parental lock or change the control level.
–Insert a correct disc that plays on this unit.
–Handle a disc with special care so that it does not have fingerprints,
scratches, or dusts on its surface.
–Reset the unit by switching the unit off, then on again.
–Aim the remote control directly at the sensor on the front of the unit.
–Reduce the distance to the unit.
–Replace the batteries in the remote control.
–Re-insert the batteries with their polarities (+/– signs) as indicated.
–Tune your radio to an empty AM station so that you hear a lot of noises.
Then, turn the volume up. If you hear some signal sound from the radio
by pressing buttons on the remote control, the remote control is working.
–To completely reset the unit, unplug the AC
cord from the AC outlet for 5-10 seconds.
–Operations may not be permitted by the disc.
Refer to the instructions of the disc.
–Use a commonly available cleaning CD/DVD to
clean the lens before sending the unit for repair.
–The angle cannot be switched for DVDs which do not contain multi-
ple angles. In some cases multiple angles are only recorded for
specific scenes.
–Check the "PARENTAL" setting.
–Enter the default password "4737", then your forgotten password
will be cleared.
–Check if any disc is already in.
–Press and hold [EJECT A] on the unit for more than 5 seconds.
– 17 –
3
3
or
ENTER
ENTER
ENTER
Select "YES".
INITIALIZE
Initialize?
NO
YES
ENTER
4
4
To exit
the menu
SETUP
Hint
Hint
Hit
twice.
• When you cancel
to initialize at step
3), select "NO".
EN
Advertisement
Table of Contents
