Cautions - Hitachi DT3130E User Manual

13.3” super tft colour lcd monitor
Table of Contents

Advertisement

b
-. -.
CAUTIONS
-.
w
A
Caution: Do not block up the vent holes.
The holes are for internal hot air to escape to keep the product from overheating.
Keep this area free of anything that hinders ventilation. Neglect can be the cause of
internal overheating leading to a fire.
A Caution: Avoid a moist, dusty environment.
Do not use or store the product in a highly humid or dusty place. Doing so could
cause a ilre.
A Caution: Take great care when moving the product.
Before moving the product, be sure to unplug the power cord and disconnect all
signal cables.
A Caution: Use the product in a place free of corrosive gas and vibration.
Oily soot, corrosive gas or constant vibration can cause the product to malfunction.
A Caution: Do not use the product in a high-temperature
environment.
If used exposed to direct sunlight, or placed near a heat source such as a radiator, the
product can malfunction.
A Caution: protect yourseti from eyestrain.
The eyes become fatigued if you keep watching the monitor for too long a period of
time. Take a break for five to ten minutes after each hour.
A Caution: Be mindful of possible electromagnetic
interference.
Electromagnetic
interference is likely to occur if the product is used adjacent to other
electronic equipment. It can be the cause of noise and undesired degradation
of
electrical performance of nearby radios or TVs.
To eliminate or reduce this effect:
Place the product away from radios or TVs as far as possible.
Adjust the direction of the radio or TV antenna.
Use a separate power outlet.
A Caution: Pay due attention when disposing of the product.
Mercury is contained in the fluorescent lamp inside the liquid crystal display (LCD).
Do not throw it away with ordinary rubbish. For disposal of the LCD, follow the
appropriate ordinance or regulation of the local government.
A Caution: Be mindful of condensation.
After moving between places with a large temperature difference, use the monitor
only after waiting a while (1 hour). Neglect can be the cause of internal overheating
leading to a fire.
7

Advertisement

Table of Contents
loading

Table of Contents